What Is IMAG and Does Your Event Need It?

IMAG puts a live, close-up shot of your speaker on the big screens in the room. Here's what IMAG is, how it works, why delay matters and how to tell if your event needs it.

IMAG stands for Image Magnification. In AV, it means live video of the person on stage, shown on big screens in the same room while they’re speaking. Your event needs it when people in the back rows can’t clearly see the speaker’s face, which usually happens once a room gets past a few hundred seats or the stage sits far from the audience. If your room is small and everyone can see the stage, you can usually skip it.

I’m Ariel Martinez, and I run Miami Video Productions. We provide event AV services, including live event camera work, video switching and livestreaming for conferences and corporate events across South Florida, so IMAG comes up in a lot of planning calls. Here’s what it is, how it works and how to tell whether you need it.

What is IMAG at a conference?

IMAG is a live camera shot of the speaker, usually a medium or close-up framing, sent to the projection screens or LED walls beside or behind the stage. The audience watches the real person on stage and a bigger version of them on screen at the same moment. It’s different from just putting slides on the screen. Slides show the content; IMAG shows the person.

You’ll see it at keynotes, general sessions, award shows, graduations and town halls, anywhere a big audience is watching one stage.

Does your event need IMAG?

Ask yourself one question: can the person in the last row see the speaker’s expression? If the answer is no, IMAG is worth it. A few signs you probably need it:

  • The room is a ballroom or general-session hall, not a meeting room.
  • The stage is wide, or there are columns and sightline problems.
  • You have a keynote speaker, a panel or an awards program where faces and reactions matter.
  • Sponsors or executives expect to look polished on the big screens.
  • You’re already livestreaming, so you’ll have cameras and a switcher in the room anyway.

You can usually skip it for small breakouts, workshops and rooms where everyone sits close to the stage. In those rooms, slides on a screen and a good sound system do the job.

How IMAG works

A typical IMAG setup has three parts:

  1. Cameras. At least one operated camera on a long lens, usually from the back of the room or a riser, framed tight on the speaker. Bigger shows add more angles for panels and audience shots.
  2. A switcher. A technical director cuts between the cameras, the slides and any playback video, so the screens always show the right thing.
  3. Screens. The switched feed goes to the projectors or LED walls, which are often supplied by the venue or a staging company.

That’s why IMAG sits so close to video switching and camera operators. The cameras and the person cutting the show make or break it.

IMAG screens

An IMAG screen is any display in the room that carries the speaker’s live shot: projection screens on either side of the stage, an LED wall behind it, or delay screens further back in a long room. Side screens often show IMAG while the center screen shows slides, and some events put both on one wall in a split layout. Screen size and placement are usually set by the staging or AV company. The video team needs to know the screen’s shape (16:9 or a custom LED size) so the shot is framed to fill it.

IMAG cameras

An IMAG camera is a camera dedicated to the tight shot of the speaker. It’s typically on a tripod or riser at the back or center of the room with a long lens, run by an operator who follows the speaker as they move. Larger shows add a second camera for wider shots or a moving presenter, and a switcher cuts between them. Because the audience sees the screen and the real person at the same moment, IMAG signal paths are kept low-delay so lips stay in sync with the room audio.

Why delay matters so much for IMAG

With IMAG, the audience sees the live speaker and the screen side by side, so any delay between the two is obvious. If the lips on screen are behind the voice in the room, it looks off right away. That’s why the IMAG feed comes straight out of the switcher to the screens, not from the livestream. A stream that’s a few seconds behind is fine for remote viewers, but it would never work on the screens in the room.

Every device in the chain, from cameras to converters, processors and screens, can add a little delay. The goal when you plan the signal path is to keep that chain as short and clean as you can.

IMAG and livestreaming can share the same cameras

If you’re already planning a livestream or a recording of your general session, the same cameras can often feed the room screens too. That can be a smart way to get more out of one crew. The thing to plan for is that the room and the stream want slightly different things. The room needs a tight, steady shot of whoever is talking, while a stream or recording can use wider shots, audience reactions and graphics. A good run of show sorts that out before doors open.

Questions to ask before you book IMAG

  • Who is supplying the screens or LED walls, and what inputs do they need?
  • Where can the camera position go, and does it block any seats?
  • Will the same cameras feed a livestream or recording?
  • Who is cutting the show, and do they have the run of show and slide deck ahead of time?
  • When is load-in, and how much time is there to test before the first session?

If you bring those answers to your AV and video teams early, the show goes a lot smoother. For the bigger picture on covering a conference, see our live event video production page.

Frequently asked questions

What does IMAG stand for?

IMAG stands for image magnification. It means showing a live, enlarged camera shot of the speaker on screens in the same room.

Is IMAG the same as a livestream?

No. IMAG is for the people in the room, and it has to be close to real time. A livestream is for people watching remotely, and a few seconds of delay is normal. They can share cameras, but they’re separate outputs.

How many cameras do you need for IMAG?

One operated camera on the speaker can work for a single presenter. Panels, award shows and bigger stages usually need two or more angles so the switcher can cut to whoever is talking.

Who provides the screens for IMAG?

It depends on the event. The screens or LED walls often come from the venue or a staging company, while the video team handles the cameras and switching. Sort out who owns what early so the signal hand-off is planned.

Can you record the IMAG feed?

Yes. The switched program can be recorded, and the individual cameras can be recorded too, which gives you more options when you edit highlights later.

Planning a conference or general session in South Florida?

Tell me about your room, your stage and your audience, and I’ll help you figure out whether IMAG makes sense and how the cameras, switching and stream fit together. Request a quote and we’ll plan it with you.

Leave a Reply

Your email address will not be published. Required fields are marked *

5.0on Google · 49 reviews